Attaching a Lego Sticker

How to correctly place a Lego sticker.

You need:

Brick separator

The sticker

The brick the sticker goes on!

Step 1: get your bits together, make sure the brick you are putting the sticker onto is clean. A quick wipe with a cloth does no harm to remove grease. It may help to attach a smaller brick to a larger one (here I used the whole model) as this helps hold it.

Step 2: take the sticker off and put one corner on the top of the brick separator.

Step 3: without touching sticker to brick, measure with the eye to make sure the stickers is centred (or however you want it).

Step 4: touch the free end to where you want the sticker and push it down by sliding your finger along it. This should prevent bubbles - do t detach from the brick separator until you e checked it. If it’s incorrect you can pull it off using the brick separator - I don’t recommend you do this more than once. If all looks good then detach the end from the separator.

Good luck!

#lego #legos #legotipsandtricks #legofan #legomoc